We don’t sell remanufactured engines for sterndrive boats
>ONLY NEW<
NEW Marine Engines from
GM & Crusader
These are the same NEW engines that Mercruiser, OMC, Volvo Penta, Crusader, etc. purchase new from GM.
One year Warranty
Prices + Specifications Subject to Change
| 181 | (3.0L) | LH | 140 hp | Vortec Base | $2,609 |
| Includes valve cover, spark plugs, flywheel, oil pan, timing cover, harmonic balancer, circulating pump and electronic distributor and coil. No Intake Maniforld. For the year 2000 GM is shipping these engines with a 14″ flywheel. If you are replacing a 1992 – 2013 engine, reuse your 12 3/4″ flywheel. If you are replacing a pre- 92 engine you must purchase a late model 12 3/4″ flywheel. We stock this flywhee. This engine is the only replacement for 153 (2.5L) and 181 (3.0L) Mercruiser, OMC and Volvo Penta. |
|||||
| 262 | (4.3L) | LH | 190 or 230 hp |
Vortec Base | $2,749 |
| These are in the crate Vortec 4.3 marine engines with valve covers, cast aluminum oil pan, composite timing cover. These are true Vortec with balanceshaft that requires 8 bolt intake and electric fuel pump. Includes circ. pump.Can be easily retro-fitted to replace ’86-’95 engines by adding an 8 bolt intake manifold for 2 BL or 4 BL. Available options: |
|||||
| Genuine GM Marine intake manifold 2 BL or 4 BL | $250 |
350(5.7L)LH270 hp87 – 96
Pre-Vortec Roller
12 Bolt Intake$2,995
NEW FROM THE GM FACTORY!
Includes oil pan, composite timing cover, and valve covers. Fits 87-96.350(5.7L)LH325 hp97 up
Vortec Roller
8 Bolt IntakeMPI Only$2,995NEW FROM THE GM FACTORY!
VORTEC FOR CARB / TBI / MPI.
Includes oil pan, composite timing cover, valve covers, water pump, harmonic balancer, reluctor wheel, and even the crank position sensor.454(7.4L)LH330-350 hpGen VI Roller
Oval Port Head $5,399Includes cast aluminum valve covers, hydraulic roller lifters, 8 qt marine oil pan, composite timing cover, harmonic balancer.
There is no provision for mechanical fuel pump – electric fuel pump
must be used.502(8.2L)LH435 hpGen VI Roller
Rect. Port Head$6,299Includes cast aluminum valve covers, hydraulic roller lifters 8 qt marine oil pan, composite timing cover.
There is no provision for mechanical fuel pump – electric fuel pump
must be used.
435 HP 504 FT/LBS Torque @ 3800 RPM
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ANY NEW PART YOU NEED PLEASE CALL
OCONNOR MARINE 617-480-8920
USED ITEMS LISTED ARE NOT OURS– They are listed for the owner All items call 978-815-5992 (no text)
Arctic Cat Snowmobile ECM- 01/02- ZR- ZL 600 part # 3005-767 (tested)
Retail is $1595.oo my price $600
Parts for Arctic cat snowmobile
Listed below-2005 660T four stroke, may fit others
Primary Clutch $175
Rear Susp, 121” entire skid- w/fox shocks, MINT $250
Chain case with reverse- $250
Fuel pump $90
Turbo unit $350
ECM – $175
Intercooler $125
Parts for 2006 a/c crossfire
Ecm Part # 3006-998 retail is $1370. my price $450
Parts for 2004 Polaris 700 RMK/touring
Ecm- part # 4010835- my price $400
Arctic cat primary clutch F6- 01/02-$150.oo
have a bunch more parts too, Give me a call! Installation available.
I have parts for japanese bikes, from wrecks. some almost complete bikes, or parts, have some good motors too. nothing real old
Sled MOTORS For Sale–All items call 978-815-5992 (no text)
-All For Sale Cheap All Run Great Guaranteed.
From Wrecks and part outs we purchased
ARCTIC CAT
99-2002 ZR/zl600 apart needs outer crank end bearings complete motor $250
SLED HOODS
1997 MACH Z HOOD With tach And Windshield, Excellent Condition. $100 fits many sleds F2000 CHASSIS
1999 formula 3 600 hood good condition, woth headlight and wiring, speedo cable, purple fits CK3 chassis sleds. 1998-2003 tripple cylinder ski doo- $100
YAMAHA hood 98 vmax with gauges and good hinges. fits viper sx srx and venture
$40
SLED EXHAUST
One rev 600 exhaust system complete, $100, or $75 for the can and $50 for the pipe.
two legend / mxz zx chassis pipes $100 each fits many different models the 2 are different one fits the small can the other fits the big can